Skip to main content

Capturing Vital Signs

Vital signs are a group of important medical signs that measure the body's most vital (life-sustaining) functions, including blood pressure, pulse rate, respiration rate, and body temperature. Capturing these signs is a common part of many procedures, so it is important to ensure that they are being recorded and stored accurately.

The Observation Resource

Vital signs are stored as Observation resources. To track the specific vital that is being observed, use the Observation.code element. This describes what was observed, and is sometimes called the observation "name". This should be coded using LOINC codes per US core guidelines.

ElementDescriptionCode SystemExample
statusThe status of the result value. Indicates if the observation is preliminary or final, if it has been amended/corrected, or if it has an error or been cancelled.Observation status typesregistered
codeThe type of observation.LOINC8867-4 – Heart Rate
subjectA reference to who/what the observation is about.Patient/homer-simpson
encounterA reference to the Encounter or visit during which the observation was made.Encounter/example-appointment
basedOnA plan or order that that prompted this observation to be made.CarePlan/example-plan
performerWho performed the observation and is responsible for its accuracy.Practitioner/dr-alice-smith
value[x] The actual result(s) of the observation.See below
dataAbsentReasonThe reason why the result is missing.Observation data absent reason typesAsked But Unknown
interpretationA categorical assessment of the result. For example, high, low, or normal.Observation interpretation typesNormal
deviceThe device used to generate the measurement. This can be medical or non-medical and can range from a simple tongue depressor to an MRI machine. Also includes personal and wearable devices such as smart phones or watchesDevice/my-apple-watch
specimenThe specimen from which the observation was derived. A sample of material taken from the patient on which laboratory testing or analysis was performed.Specimen/finger-prick-blood-sample
componentSome observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. An example is systolic and diastolic component observations for blood pressure measurements.See below

To record the actual value of a measurement, you can use one of the various value fields on the Observation resource. There are fields for valueQuantity, valueString, valueBoolean and more.

Example: basic reading of body temperature
{
"resourceType": "Observation",
"id": "example-observation-1",
"code": {
"system": "http://loinc.org",
"code": "8310-5",
"display": "Body temperature",
},
"valueQuantity": {
"value": 98.2,
"unit": "degrees Fahrenheit",
"system": "http://unitsofmeasure.org/",
"code": "[degF]",
},
"status": "final",
}
Example: an observation generated from a survey resposne
{
"resourceType": "Observation",
"id": "example-observation-2",
"code": {
"system": "http://loinc.org",
"code": "29463-7",
"display": "Body weight",
},
"valueQuantity": {
"value": 165,
"unit": "pounds",
"system": "http://unitsofmeasure.org/",
"code": "[lb_av]",
},
"status": "preliminary",
// A representation of how the measurement was made, in this case through a survey
"method": {
"system": "http://example-practice.org/",
"code": "entry-survey",
"display": "entry survey",
},
}
Example: an observation generated by a device
{
"resourceType": "Observation",
"id": "example-observation-3",
"code": {
"system": "http://loinc.org",
"code": "8480-6",
"display": "Systolic blood pressure",
},
"valueQuantity": {
"value": 100,
"unit": "mmhG",
"system": "http://unitsomeasure.org",
"code": "mm[Hg]",
},
"status": "preliminary",
// The device that measured the observation, in this case
"device": {
"resource": {
"resourceType": "Device",
"id": "example-device",
},
},
}
Example: an observation performed by the patient
{
"resourceType": "Observation",
"id": "example-observation-4",
"code": {
"system": "http://loinc.org",
"code": "8867-4",
"display": "Heart rate",
},
"valueQuantity": {
"value": 70,
"unit": "beats per minute",
"system": "http://unitsomeasure.org",
"code": "{Beats}/min",
},
"status": "preliminary",
// This was recorded by the patient, as we can see both the subject and the performer are the patient with the same id
"subject": {
"resource": {
"resourceType": "Patient",
"id": "example-patient",
},
},
"performer": {
"resource": {
"resourceType": "Patient",
"id": "example-patient"
},
},
}
Note on units

The valueQuantity field is stored as a Quantity type, which contains a value field to represent the numerical value and a unit field, which is a human readable unit that defines what is measured. Whenever possible, the unit should be coded using Unified Codes for Units of Measure (UCUM).

Observation Datatypes

Observation resources can be measured in many different ways. To account for this, the value[x] fields provide multiple ways to account for different datatypes.

value[x]DescriptionDatatypeApplicationExample
valueQuantityUsed for numeric measurements with a value and unit.QuantityHeight177 cm
valueCodeableConceptUsed when the value is represented by a coded concept (e.g. LOINC or SNOMED).CodeableConceptHIV test interpretation260385009 – Negative
valueStringUsed for text values that do not require a specific coding.stringPain levelmild pain
valueBooleanUsed for binary observations, where the result is either true or false.booleanVaccination statustrue
valueIntegerUsed for simple integer values with no units.numberAge28
valueRangeUsed for observations that have a range as a result.RangeBody temperature98.0 – 98.7
valueRatioUsed to represent ratios between two values as a result.RatioHeight over body weight177 cm / 75 kg
valueSampledDataUsed to represent data that is sampled over a period of time.SampledDataGlucose measurement6 mmol/l
valueTimeUsed to represent the exact time an observation was made, without a date.stringTime heart rate returned to normal15:30:00
valueDateTimeUsed to represent the exact time and date an observation was made.stringBirth date and time2023-07-24T13:22:00Z
valuePeriodUsed for observations that have a specific duration or period.PeriodMenstrual cycle duration2023-05-12 – 2023-6-09

Multi-component Observations

In some cases it is possible for an Observation to have multiple "sub-observations". The Observation.component field can be used in these cases when there are multiple results that cannot be reasonably interpreted individually.

The component element should only be used when there is one method, one observation, one performer, one device, and one time.

caution

While creating sub-observations can provide powerful functionality, it can be complex to maintain and operationalize. It is recommended to only use the component field when absolutely necessary.

A classic example of a multi-component Observation is systolic and diastolic blood pressure.

Example
{
"resourceType": "Observation",
"id": "example-component-observation",
"code": {
"system": "http://loinc.org",
"code": "85354-9",
"display": "Blood pressure panel with all children optional",
},
"component": [
{
"code": {
"system": "http://loinc.org",
"code": "8480-6",
"display": "Systolic blood pressure",
},
"valueQuantity": {
"value": 100,
"unit": "mmHg",
"system": "http://unitsofmeasure.org/",
"code": "mm[Hg]",
},
},
{
"code": {
"system": "http://loinc.org",
"code": "8462-4",
"display": "Diastolic blood pressure",
},
"valueQuantity": {
"value": 80,
"unit": "mmHg",
"system": "http://unitsofmeasure.org/",
"code": "mm[Hg]",
},
},
],
}

Reference Ranges

The Observation.referenceRange element is a range of values that corresponds to what is considered normal for a specific patient given their age, gender, race, etc.

The set of all possible values for a referenceRange is defined in the ObservationDefinition resource and is usually set up by clinical administrators. For more details, see the Observation Reference Ranges docs.